XMC1202-Q040X0016

The RGB LED Lighting Shield from Infineon is one of the first intelligent evaluation boards compatible with Arduino as well as Infineon's XMC1100 Boot Kit. The RGB LED Lighting Shield with XMC1202 for Arduino uses a DC/DC buck topology and is able to drive up to 3 LED channels with constant current. The shield itself is powered by a programmable XMC 32-bit ARM® MCU with embedded Brightness Color Control Unit (BCCU, XMC1200 MCU series), for flicker-free LED dimming and color control.

The XMC1200 CPU Card (CPU-12 A-V1 ) houses the XMC1200 Microcontroller and a 2x30 pin edge for application expansion. This board along with application cards (e.g. LED Lighting Application Card) demonstrates the capabilities of XMC1200. The main use case for this board is to demonstrate the generic features of XMC1200 device including tool chain. The focus is safe operation under evaluation conditions. The board is neither cost nor size optimized and does not serve as a reference design.

The XMC 3 channels RGB LED Lighting Shield from Infineon technologies is one of the first intelligent evaluation boards compatible with Arduino as well as Infineon’s XMC1100 BOOT KIT. It is designed to be easily configurable and combinable for different LED light engines and lamps, for fast prototyping and in-expensive evaluation of LED lighting applications. <p>The RGB LED Lighting Shield with XMC1302 uses a DC/DC buck topology and is able to drive up to 3 LED channels with constant current. The shield itself is powered by a programmable XMC 32-bit ARM® MCU with embedded Brightness Color Control Unit (BCCU, XMC1300 MCU series), for flicker-free LED dimming and color control. <p>The BCCU enables extreme low-cost but high quality LED lighting solutions, with minimal user code. The RGB LED lighting shield has also been designed to provide options for the evaluation of smooth, eye-friendly dimming, color mixing for different topologies, and it can be extended with for example DALI/DMX or radar.

The XMC 2Go Kit with XMC1100 is maybe the world’s smallest, fully featured Microcontroller Evaluation Kit showcasing - XMC1100 (ARM® Cortex™-M0 based) - On-board J-Link Lite Debugger (Realized with XMC4200 Microcontroller) - Power over USB (Micro USB) - ESD and reverse current protection - 2 x user LED - Pin Header 2x8 Pins suitable for Breadbord

XMC™ Link is an isolated debug probe for all XMC™ microcontrollers. The debug probe is based on SEGGER J-Link debug firmware, which enables use with DAVE™ and all major third-party compiler/IDEs known from the wide ARM® ecosystem.